Pole Single Telescopic Ladder with Hook+Balance bar

Hook Installation Process: Four Effortless Steps

This hook boasts easy installation and removal features, blending safety with simplicity.

1.Position the latch directly opposite the hook hole for precise alignment.
2.Get ready to push the switch leftward for a complete 360° turn.
3.Slide the hook in, release the switch, and confirm that the latch has snugly fitted into the hook hole.
4.Adjust the hook to your preferred angle with its rotatable design.

Wall Hanging Strength

1.The hook base utilizes advanced German rivet technology, providing robust strength and stability. It remains firmly in place, without any risk of loosening.

2.For 360° rotation, simply use the hook as needed. If you wish to fix the hook in a specific direction, simply tighten the screw at the bottom and install it accordingly. For further assistance, refer to our video tutorial or contact customer service.

Versatile Fence Hook

1.Our fence hook can securely attach to round and square pipes with a diameter of up to 7cm. The top is stress-resistant, preventing slipping and leaning.

Hooking onto Fences

1.Easily hook onto 7cm diameter round and square pipes. The stress-resistant design ensures minimal risk of slipping or leaning.

Flat Against the Wall

1.The hook allows for 360° advertising display.
2.The hook’s surface is wrapped in PVC rubber, ensuring no marks or scratches are left on the wall after installation.

Correct Procedure for Opening the Ladder:

1.Start by pulling open from the top and collapsing from the bottom.
2.Make sure all rungs are extended fully.
When using the ladder in a compact form, open the top fully and collapse the bottom. Avoid tampering with the middle section. Secure each rung’s lock before climbing.

Incorrect Procedure for Opening the Ladder:
1.The middle rung is partially open and partially shut.
2.The middle rung is not fully pulled out, resulting in a false lock.