Pole Stainless Steel Single Telescopic Ladder with Balance bar

Wall hanging
The hook base adopts German advanced rivet technology, which is strong in force, firm and not loose, and more assured
The hook can be rotated 360 degrees. If you need to fix the hook in one direction, you don’t need to turn it. Just tighten the screw at the bottom of the hook and install the hook in the direction you want. If you don’t understand, you can watch the video tutorial or consult customer service.

Hook the fence hook can hook the 7cm diameter round and square pipes, the top is stressed, and it is not easy to slide and lean back

hook the fence
The hook can hook 7 cm diameter round and square pipes, the top is stressed, and it is not easy to slip and lean back

Flat against the wall
1. Hooks can advertise 360 degrees
2 The surface of the hook is wrapped with PVC rubber, and there will be no traces on the wall after construction

Balance Bar Installation Instructions:

1.Take out and discard the anti-pressure plug.
2.Position and insert the balance bar correctly.
3.Press down hard on the balance bar to break the plastic rivet for installation.
4.Insert screws to lock the balance bar in position.

Right Way to Set Up the Ladder:
1.Start by pulling open from the top and compressing from the bottom.
2.Open all the steps completely.
For shorter use, open the top fully and compress the bottom. Avoid any adjustments to the middle section. Ensure each step’s lock is engaged before using the ladder.

Wrong Way to Set Up the Ladder:
1.The middle step is neither fully open nor fully closed.
2.The middle step is not fully extended, resulting in a mislock.